Initiating automotive component reuse in Malaysia

As the production of local vehicles increases, the impact of end-of-life vehicles (ELVs) wastes to the environment will also increase. ELVs recovery including reuse, remanufacture, and recycle apparently become a strategy in solving this environmental problem. This study identifies the existing conditions of automotive reuse in Malaysia by conducting some interviews in selected local automotive and automotive component manufacturers. Results from the interviews indicated that reuse of automotive components in newly manufactured vehicles has never been practiced by the selected companies. However, there is interest among respondents in developing automotive components for after-market reuse. Some strategies were proposed in this study to initiate automotive components reuse in the local automotive manufacturers including the establishment of the end-of-life directive, enhance research and development on design for reuse and increase reusability and economic benefits of reuse.     

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface–subsurface soils

Environmental Geochemistry and Health - The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil...     

Correlation of cadmium and aluminum in blood samples of kidney disorder patients with drinking water and tobacco smoking: related health risk

The combined exposure to aluminum (Al) and cadmium (Cd) causes more pronounced adverse health effects on humans. The kidneys are the main organs affected by internal exposure to Cd and Al via food and non-food items. The objective of present study was to measure the Al and Cd concentrations in cigarettes tobacco (branded and non-branded) and drinking water (domestic treated, ground and lake water) samples in southern part of Pakistan, to assess the risk due to ingestion of water and inhalation of cigarettes smoke containing high concentrations of both elements. The study population (kidney disorder and healthy) divided into two group based on consuming lake and ground water, while smoking non-branded cigarette as exposed, while drinking domestic treated water and smoking branded cigarette as non-exposed. Electrothermal atomic absorption spectrometry was used to determined Cd and Al concentrations in tobacco, drinking water and blood samples. The resulted data indicated that the levels of Al and Cd in lake and underground water were higher than the permissible limit in drinking water recommended by the World Health Organization. The biochemical parameters of exposed and referent patients, especially urinary N-acetyl-h-glucosaminidase, were used as a biomarkers of kidney disorder. Exposed kidney disorder patients have higher levels of Cd and Al than the exposed referents subjects, while difference was significant when compared to resulted data of non-exposed patients and referents (p = 0.01–0.001). The pearson correlation showed positive correlation between both toxic element concentrations in water, cigarettes versus blood samples of exposed subjects (r = 0.20–0.67 and 0.71–0.82), while lower values were observed for non-exposed subjects (r = 0.123–0.423 and 0.331–0.425), respectively.

     

Episodic envy and counterproductive work behaviors: Is more justice always good?

The authors examined how perceived event‐specific procedural and distributive justice about own and envied others' outcomes interacts with episodic envy to predict counterproductive work behaviors. Our results were consistent with the attribution model of justice, finding that episodic envy significantly predicted counterproductive work behaviors aimed at envied others in the workplace and that this relationship was more pronounced when perceptions of procedural, but not distributive, justice about own or envied others' outcomes were high rather than low. We tested a moderated‐mediation model in which self‐attributions for the outcome mediated the effect of episodic envy on counterproductive work behaviors and that the effect of envy was stronger when perceptions of own or others' procedural justice were high rather than low. This research contributes to the literature on envy processes in the workplace and is the first to use a specific emotion, envy, as a proxy for a negative outcome in a demonstration of the attribution model of justice. Copyright © 2013 John Wiley & Sons, Ltd.     

The status of heavy metal levels in a Ramsar site,Kuala Gula bird sanctuary: the impact of the anthropogenic inputs

Distributions of Cd, Cu, Pb, and Zn in the surface sediments from two sites of the Kuala Gula Bird Sanctuary, Malaysia were monitored for a period of 6 months from October 2006 to March 2007. In December 2006, the concentration of Zn in one location was significantly (p??1) than the other metals at both sites, but in the oxidizable organic fraction it was highest at both sites during October; with mean concentrations of 18?mg?kg^?1 at both locations. In the acid-reducible fraction, high concentrations of Pb (2.3?mg?kg^?1) were detected at station 2 in February 2007, being highest among all four metals at both stations. The acid-reducible fraction found in Pb ranged from 0.10% to 3.1% in both stations. Percentages ranging from 51% to 96% were observed for all four metals in the resistant fraction throughout the sampling period. These results indicate low contributions from anthropogenic sources. The findings constitute a baseline data archive for future reference.     

Oxidative stress in the freshwater cyprinid crucian carp (Carassius carassius L.) upon chronic exposure to endosulfan

Oxidative stress and antioxidant responses of crucian carp, upon chronic exposure to endosulfan, were evaluated in vivo. The lethal concentration (LC_50–96?h) was 70 μg L^?1; on its basis, the fish were exposed to endosulfan at 20, 35, and 50 μg L^?1 and autopsy was done on days 1, 2, 3, 4, 7, 14, 21, 28, and 35. Lipid peroxidation was induced in a concentration-dependent manner, being highest at 50 μg L^?1 (3/4 LC_{50–96 h}, sub-lethal concentration-I, SL-I) on day 4 (720% versus control), followed in its extent (490%) at 30 μg L^?1 (1/2 LC_{50–96 h}, sub-lethal concentration-II, SL-II) on day 7 and lowest (260%) at 10 μg L^?1 (1/4 LC_{50–96 h}, sub-lethal concentration-III, SL-III) on day 14. Glutathione showed a concentration- and time-dependent elevation in the initial phase, with highest level on day 4 (180%) at SL-I, but showed significant reduction in all test concentrations from day 21 of post-exposure. Superoxide dismutase was decreased significantly throughout the study, with highest reduction (63%) on day 4 at SL-I; catalase increased in all test concentrations up to day 14 but showed a significant decrease from the day 28 of post-exposure. The potential role of these parameters as indicators of pesticide pollution in aquatic systems is discussed.     

Heavy metals distribution and risk assessment in soils affected by tannery effluents

Effluents collected from tanneries in Sialkot showed considerably higher levels of heavy metals. Sodium (12 660.91 mg/L) among macronutrients and Cr (592.20 mg/L) among heavy metals were found in the highest concentrations. Effluent parameters, i.e. biological oxygen demand (BOD; 12.40), chemical oxygen demand (COD; 16.53), Cd (5.90), Cr (592.20) and Fe (18.59) were the respective times higher than Pakistan National Environmental Quality Standards and their continuous unchecked discharge into agricultural soils poses a potential risk. Mean concentrations (mg/L) of Cr (592.20), Ni (2.66), Mn (1.16), Fe (37.17), Zn (0.90), Cd (0.59) and Pb (1.18) in this study exceeded levels recorded to date from different tanning hubs in Pakistan. Factor analysis/principal components analysis (FA/PCA) for the effluent parameters resulted in six varimax factors, i.e. VF1 (salinity, electrical conductivity, total dissolved solids, chloride, phosphate, BOD and COD; including characteristic tannery effluent features), VF2 (pH, Cr and alkalinity; tanning operations), VF3 (Cd and Pb; dyeing processes), VF4 (Mn and Fe; finishing operations), VF5 (Ni; retaining processes) and VF6 (hardness, Ca and Cu; bating processes). Cluster analysis performed on metal data resulted in three clusters confirming metal–metal relations obtained either from FA/PCA or a correlation matrix. The results of this study are useful for heavy metal source apportionment, assessment of risk to peripheral soils and the future management of environments around tanneries.     

High dechlorination of PCBs catalysed by carbon under mild conditions

This article reports high dechlorination of toxic polychlorinated biphenyls (PCBs) under mild conditions. PCBs are priority pollutants acting as endocrine disruptors, human carcinogens and environmental estrogens. Previous remediation methods involving high temperature and pressure have drawbacks such as high cost, de novo dioxins synthesis and difficult recovery of vaporized PCBs. On the other hand, dechlorination methods using mild conditions show the problem of catalyst deactivation. Here, activated carbon was used for the first time as catalyst to dechlorinate 2,4,5 trichlorobiphenyl. High dechlorination, of 87%, was achieved under mild conditions. 2,4,5 trichlorobiphenyl was treated at 40–150°C with calcium hydroxide, sodium hydroxide and sulfur in mixed water and organic solvents. Dechlorination products were biphenyl, orthohydroxy biphenyls, 2,4 dihydroxy biphenyls and biphenyl-2-thiol. Dichlorobiphenyl and orthochlorobiphenyls were found in trace quantities. We found that carbon particles catalysed dechlorination by substitution reactions and suppressed further chlorination. Dechlorination at biphenyl ortho position was preceded by substitution reaction by hydroxyl and thiol ions. Moreover, in the absence of carbon, dechlorination was lower and substituted products were not observed. These findings may be applied at industrial scale to remediate PCB-contaminated waste.     

Relative salinity tolerance of warm season turfgrass species

Fresh water, coupled with soil salinization in many areas has resulted in an increased need forscreening of salt tolerant turf grasses. Relative salinity tolerance of eightwarm season turfgrass species were examined in this study in sand culture. Grasses were grown in a glasshouse, irrigated with either distilled water or saline sea water adjusted to 24, 48 or 72 dSm-1. Salt tolerances of the grasses were assessed on the basis of their shoot and root growth, leaf firing and turf quality. Regression analysis indicated that Zoysiajaponica (Japanese lawn grass) (JG), Stenotaphrum secundatum (St. Augustine) (SA), Cynodon dactylon (satiri) (BS), Zoysia teneuifolia (Korean grass) (KG), Digitaria didactyla (Serangoon grass) (SG), Cynodon dactylon (Tifdwarf) (TD), Paspalum notatum (Bahia grass) (BG) and Axonopus compressus(Pearl blue) (PB) suffered a 50% shoot growth reduction at 36.0, 31.8, 30.9, 28.4, 26.4, 25.7, 20.0 and 18.6 dSm1 of salinity, respectively and a root growth reduction at44.9, 43.7, 33.4, 31.0, 29.5 27.5, 21.5 and 21.4 dSm- of salinity, respectively. Leaf firing and turf quality of the selected species, as a whole, were also found to be affected harmoniously with the change in root and shoot growth. On the basis of the experimental results the selected species were ranked for salinity tolerance as JG>SA>BS>KG>SG >TD>BG>PB.     

Groundwater modeling of Saq Aquifer Buraydah Al Qassim for better water management strategies

Saudi Arabia is an arid country. It has limited water supplies. About 80?C90% of water supplies come from groundwater, which is depleting day by day. It needs appropriate management. This paper has investigated groundwater modeling of Saq Aquifer in Buraydah Al Qassim to estimate the impact of its excessive use on depletion of Saq Aquifer. MODFLOW model has been used in this study. Data regarding the aquifer parameters was measured by pumping tests. Groundwater levels and discharge of wells in the area for the year 2008 and previous record of year 1999 have been collected from Municipal Authority of Buraydah. Location of wells was determined by Garmin. The model has been run for different sets of pumping rates to recommend an optimal use of groundwater resources and get prolonged life of aquifer. Simulations have been made for a long future period of 27?years (2008?C2035). Model results concluded that pumping from the Saq Aquifer in Buraydah area will result into significant cones of depression if the existing excessive pumping rates prevail. A drawdown up to 28?m was encountered for model run for 27?years for existing rates of pumping. Aquifer withdrawals and drawdowns will be optimal with the conservation alternative. The management scheme has been recommended to be adopted for the future protection of groundwater resources in Kingdom of Saudi Arabia.